14 PGM Outputs

• up to 5 high current outputs… 1 on main panel plus :
  
  

  PC5204	-	4 output high current power supply module
  	-	1 output fully supervised for siren output

• up to 9 low current outputs… 1 on main panel plus :
  
  

  PC5208

  -

  8 low current output module

• supports all major formats including SIA and Contact ID
  
  
• LINKS1000™ cellular communication
  
  
• LINKS2150™ and LINKS2450™ long range radio communication
  
  
• DVACS communication using PC5400 or PC5720 modules
  
  
• Downlook video transmission using PC5108L module on Power832 PC5015 main control panel
  
  
• event initiated personal paging
  
  
• 3 phone numbers (3rd backs up primary number)
  
  
• 2 account numbers

Integrated Intercom Audio

• supports Central Station Two Way Voice and Home Intercom features using PC5928 audio interface module, PC5921 intercom stations, and PC5904 two way listen-in stations

Integrated CCTV

• supports Downlook still frame video transmission using PC5108L module on Power832 PC5015 main control panel
  
  
• provides local VCR/monitor video switching for 8 cameras

Integrated Voice Assisted Security & Home Automation

• Escort5580 & 5580TC provide voice assisted security and automation control for up to 32 X-10 devices plus thermostat control on 5580TC

Efficient Installation

• 4 wire communications bus (KEYBUS)

  -	connect modules up to 1000' (305m) from control panel
  -	PC5204 - 4 output high current power supply module provides up to 1A auxiliary power
  -	main panel provides up to 550mA auxiliary power

• PC5010 main control panel - alarm only
  
  
• PC5015 main control panel - alarm plus Downlook video capability
  
  
• support up to 32 zones using any combination of up to :

  -	8 hardwire zones on main panel
  -	8 hardwire zones using PC5108L video matrix module (on PC5015 only)
  -	4 general purpose hardwire zones and 2 waterflow hardwire zones using PC5700 fire module (in Canada only)
  -	24 hardwire zones using PC5108 eight zone expander modules
  -	8 keypad zones
  -	32 wireless zones using PC5132 wireless receiver module

   

• zone programming

  -	all zones programmable as burglary or fire
  -	zone options include : Normally Closed loop, Single End of Line (EOL) resistor, and Double EOL resistor * * keypad zones cannot be programmed as fire zones and cannot support Double EOL resistor supervision
  -	27 programmable zone types, 8 programmable zone options

  Top of Page

• audible alarm output

  -	supervised bell output - 700 mA @ 12VDC, PTC protected, current limited at 3 A
  -	steady, pulsed, temporal pattern, or strobe fire output
  -	additional supervised siren output is available using PC5204 power supply module

   

• programmable voltage outputs

  -	1 high current 300mA PGM… can also be used for 2 wire smoke with a maximum of 20 detectors at 15mA per detector
  -	1 low current 50mA PGM
  -	8 additional low current PGM outputs using PC5208 module
  -	4 additional high current PGM outputs using PC5204 module
  -	24 programmable options

   

• local PCLINK™ and remote upload/download capability

  -	program system using DLS software and direct PC connection to control panel or via remote PC over telephone line
  -	view status and trouble conditions, and system 128 event buffer
  -	remote access can be controlled by owner to prevent unauthorized access to system

  Top of Page

• power supply

  -	550mA @ 12.5VDC auxiliary power (400mA for UL applications)
  -	positive temperature coefficient (PTC) protected battery, AUX, and Bell output
  -	electronic protection of KEYBUS
  -	supervision of AC power loss, low battery, auxiliary power failure
  -	internal clock locked to AC power frequency

   

• EEPROM memory

  -	will not lose programming or system status on complete AC and battery failure

  Top of Page

• digital communicator

  -	supports all major formats including SIA & Contact ID
  -	supports LINKS1000™ cellular communications
  -	supports LINKS2150™ and LINKS2450™ long range radio communications
  -	3 phone numbers (3rd backs up primary)
  -	2 account numbers
  -	DTMF or pulse dialing
  -	DPDT line seizure
  -	anti-jam feature
  -	split reporting of selected events to each telephone number
  -	event initiated personal paging

   

• battery required : 12V, 4 Ah, rechargeable sealed lead acid
  
  
• transformer required : 16.5VAC, 40VA

• 38 - 4 or 6 digit access codes

  -	32 user codes, 1 system master code, 2 partition master codes, 2 duress codes, and 1 maintenance code

   

• automatic arming by partition

  -	each partition may be programmed to auto-arm at its own time each day

   

• keypad lockout

  -	panel can be programmed to lockout keypad if a series of incorrect access code entries are made

   

• 'quick arm' and 'quick exit'

  -	allows users to arm and exit easily

   

• 'stay/away' zones and 'stay' arming

  -	security of perimeter arming while premise is occupied

   

• door chime

  -	programmable by zone
  -	monitor a door by having keypad beep when the door is opened and again when door is closed

• 128 event buffer

  -	all events automatically stored with time and date stamp to buffer
  -	events can be printed on-site using the PC5400 serial printer interface module, viewed through an LCD Keypad, or viewed and printed via PC using DLS software

  
  
  
  Full Supervision

  The system continuously monitors the following trouble conditions :

  • AC power failure
    
    
  • trouble by zone
    
    
  • fire trouble
    
    
  • telephone line trouble
    
    
  • low battery
    
    
  • bell output trouble
    
    
  • loss of internal clock
    
    
  • tamper by zone
    
    
  • fail to communicate
    
    
  • aux power supply fault
    
    
  • module fault (supervisory or tamper)
    
    
  • camera troubles (on PC5015 with Downlook)

  
  
  
  False Alarm Prevention Features

  • audible exit delay
    
    
  • audible exit fault
    
    
  • quick exit
    
    
  • urgency on entry delay
    
    
  • swinger shutdown
    
    
  • cross zone alarm
    
    
  • recent closing transmission
    
    
  • burglary verified timer *
    
    
  • double hit timer *
    
    
  • communication delay
    
    
  • rotating keypress buffer
    
    
  • arm/disarm bell squawk
    
    * on PC5015 v2.2x and higher

The Power832 security system is fully programmable from the attractive, easy to use dual-language LCD5500Z keypad :

 

• connect up to 8 keypads, combination LED and/or LCD

   

• zone input

  -	connect detector to keypad to avoid separate wiring back to panel

  Top of Page

• multi-language (languages vary according to country)

  -	simple key entry to toggle between languages while viewing keypad

   

• rotating keypress buffer reduces access code entry false alarms

   

• large 32 character display

  -	zone identification
  -	system instructions
  -	system status
  -	128 event buffer
  -	trouble conditions

   

• plain language operating instructions

  -	menu for user functions
  -	what key to press for specific functions
  -	steps for programming functions

  Top of Page

• automatic scrolling of alarms in memory

  -	scrolls through alarms in memory while keypad is idle

   

• 12 hour or 24 hour clock display

   

• 5 programmable function keys with 25 options such as Home Arm, Away Arm, Quick Exit etc.

   

• 4 keypad-activated alarms : Fire, Auxiliary, Panic, and Duress

   

• 3 LED indicators : Ready, Armed and Trouble

  -	allow system status to be viewed at a glance

  Top of Page

• backlit display

  -	display and keys backlit for easy viewing in low light conditions
  -	adjustable brightness and contrast
  -	Backlighting Boostprovides extra high key lighting when any key is pressed

   

• piezo buzzer

  -	provides audible feedback for correct key entries, pre-alert, and system trouble status
  -	adjustable buzzer tone

   

• connect to 4 wire KEYBUS up to 1000' (305m) from control panel

   

• specifications

  -	current draw : 85mA with backlighting boost
  -	dimensions : 5.75" W x 4.5"H x 1" D (144 x 114 x 25mm)

The Power832 system is fully programmable from any of the attractive, easy to use, LED keypads :

 

• 3 keypads available :
  PC5508Z ........ 8 zone LED keypad
  PC5516Z ........ 16 zone LED keypad
  PC5532Z ........ 32 zone LED keypad

   

• zone input

  -	connect detector to keypad to avoid separate wiring back to panel

   

• rotating keypress buffer reduces access code entry false alarms

   

• 5 programmable function keys with 25 options such as Home Arm, Away Arm, Quick Exit etc.

   

• LED indicators : Ready, Armed, Trouble, Memory, Bypass, Fire, Program

   

• 4 keypad-activated alarms…Panic, Auxiliary, Fire, and Duress

   

• backlit display…with Backlighting Boost to provide extra high key lighting when any key is pressed

   

• piezo buzzer…provides audible feedback for correct key entries, pre-alert, and system trouble status… with adjustable buzzer tone

   

• connect to 4 wire KEYBUS up to 1000' (305m) from control panel

   

• specifications

  -	current draw : 85mA with backlighting boost
  -	dimensions : 5.75" W x 4.5"H x 1" D (144 x 114 x 25mm)

PC5400 - Printer Interface Module

• both PC5400 and PC5400DV may be used at the same time on a system
  
  
• provides RS232 serial printer connection for report of events logged to the system event buffer… prints event, partition, time, and date that event occurred
  
  
• supports any 300, 1200, 2400 or 4800 BPS serial printer
  
  
• connect printer up to 200' (61m) from PC5400
  
  
• connect PC5400 up to 1000' (305m) from control panel via KEYBUS
  
  
• current draw : 65mA @ 12VDC
  
  
• maximum one module per system

PC5400DV - DVACS Interface Module

• both PC5400 and PC5400DV may be used at the same time on a system
  
  
• provides ULC Level 3 Line Security.
  
  
• provides full DVACS reporting of all system events.
  
  
• module is pre-programmed to SIA zone definitions
  
  
• events simultaneously communicated via DVACS and other installed communications mode such as digital or cellular
  
  
• full cross supervision between the system control panel and the DVACS module e.g… problems with one will be communicated to the central station by the other.
  
  
• central station requires Sur-Gard receiver with DVL2A version 2 or higher software.
  
  
• complete with 8 pin jack, and communications and power cables for connection to F1/F2 subset.
  
  
• connect up to 1000' (305m) from control panel via KEYBUS
  
  
• module current draw : 65mA @ 12VDC

Top of Page

Hardwired Expansion

PC5108- 8 Zone Expansion Module

• adds 8 hardwired general purpose burglary or fire zones
  
  
• provides 100mA @ 12VDC auxiliary current, PTC protected
  
  
• connect up to 1000' (305m) from control panel via KEYBUS
  
  
• module current draw : 35mA @ 12VDC

...Canada only
PC5700 Fire Zone Expansion Module

• a zone expansion module which provides:

  -	dual supervised telephone lines
  -	2 Class A supervisory waterflow zones
  -	ground fault detection zone
  -	4 general purpose fire or burglary zones

   

• tamper and trouble reporting codes

   

• connect up to 1000' (305m) from control panel via KEYBUS

• module current draw: 150mA @ 12VDC

...Canada only
PC5720 Fire/ Printer / DVACS Module

• a zone expansion module which can also be used to provide either a serial printer or DVACS communications interface

   

• 8 zone inputs include :

  -	2 Class A supervisory waterflow zones
  -	ground fault detection zone
  -	5 general purpose fire or burglary zones

   

• as RS232 printer interface :

  -	baud rates… 300, 1200, 2400, 4800
  -	connect printer up to 200' (61m) from the PC5720 module

   

• as DVACS interface :

  -	provides ULC Level 3 Line Security.
  -	provides full DVACS reporting of all system events.
  -	module is pre-programmed to SIA zone definitions

-	events simultaneously communicated via DVACS and other installed communications mode such as digital or cellular
-	full cross supervision between the system control panel and the DVACS module i.e… problems with one will be communicated to the central station by the other.
-	central station requires Sur-Gard receiver with DVL2A version 2 or higher software.
-	complete with 8 pin jack, and communications and power cables for connection to F1/F2 subset.

 

• connect up to 1000' (305m) from control panel via KEYBUS

• module current draw @ 12VDC : 80mA standby, 100mA with printer, 120mA with DVACS

Top of Page

Wireless Expansion PC5132 Wireless Receiver